Profile
It is the equipment that applies zinc plating by dipping a sheet of hot-rolled steel into a molten zinc pot so as to be coated with zinc deposits.
Steel grade: Steel grade: SGCC SGCD or DX51/52/53/54D+Z
Thickness: 0.18-3.0mm
Width: 1000mm, 1200mm, 1250mm (The special width 914mm, 1219mm, 1220mm will be available )
Surface Finish: Regular Spangle, Minimized Spangle
Coating Thickness; Min. Single Side coating Thickness: 50 g/sqm
Max. Single Side coating Thickness: 275 g/sqm
Surface Treatment: Chromating Treatment, Oiled
Inside diameters: 508 mm
Outside diameter: According to the weight of coil
Weight/coil: 3-8 ton
Packing condition: Seaworthy
Packing weight(without pallet): 25 kgs
Packing weight(with pallet ): 55 kgs
Productivity: 300, 000 tons/year
Max. Single Side coating Thickness: 225 g/sqm
Inside diameters: 508 mm
Outside diameter: According to the weight of coil
Weight/coil: 3-8 ton
Packing condition: Seaworthy
Packing weight(without pallet): 25 kgs
Packing weight(with pallet ): 55 kgs weight of coil
Weight/coil: 3-8 ton
Packing condition: Seaworthy
Packing weight(without pallet): 25 kgs
Packing weight(with pallet ): 55 kgs
| Base metal |
steel grade |
Chemical constitution (heat analysis)% |
| C less than |
Si less than |
Mn less than |
P less than |
S less than |
Alt less than |
Ti less than |
Nb less than |
| Cold rolled base metal |
DX51D+Z |
0.1 |
0.3 |
0.5 |
0.035 |
0.035 |
- |
- |
- |
| DX52D+Z |
0.08 |
- |
0.45 |
0.03 |
0.03 |
- |
- |
- |
| DX53D+Z |
0.08 |
- |
0.4 |
0.03 |
0.03 |
- |
- |
- |
| DX54D+Z |
0.01 |
0.1 |
0.3 |
0.025 |
0.02 |
0.015 |
0.1 |
- |
| DX55D+Z |
0.01 |
0.1 |
0.3 |
0.025 |
0.02 |
0.015 |
0.1 |
0.1 |
Audited Supplier 
){kind=link}
){kind=link}