Aluzinc coil
1. Aluzinc steel coil
2. Standard of Aluzinc steel coil: JIS G3302, the Galvalume Steel strip quality can According to the Europe standard.
3. The content of the material: SPCC +AZ
4. Surface treatment of the Aluzinc steel coil: Chromated. Oiled, bright finish, Fingerprint resistance
5. Thickness of the Aluzinc steel coil: 0.2mm
6. Width of the Aluzinc steel coil: 914MM
7. Coating weight: 150g
8. Aluzinc steel coill weight: As per customers' requests
9. Aluzinc steel coil ID: 508mm.
10. Applications: General use, construction industry, household appliance industry, Automobile industry and industrial instruments
Package: Fancy package or as per customers' requests
11. Place of production: China
Production Procedure:
Aluminium-zinc alloy armor plate, is called Al-Zn coated plate for short Strips, after through three processes, including payoff reel, crop shear and welding, enter into the continuous annealing furnace. During the annealing process, strips are heated closer to the recrystallizing temperature, and then heated to 20~50º C above the recrystallizing temperature in the reducing furnace. After keeping the same temperature for 170s, strips are naturally cooled to the normal temperature in the slow cooling process. Afterward, strips enter into the zinc pot through the elephant's trunk and begin in the hot-dip coating process. The optimum temperature range of the plating coat is 630º C~660º C. Coated with aluminium-zinc alloy, strips enter into the cooling tower by the steady roll and air knife. After fast cooled with wind or water, they are directly produced into Al-Zn armor plates. The general rate of cooling is 30º C/s or so, and strips are cooled to about 60º C.
| Chemical Requiremetns for structure steel |
| Composition, %-Heat Analysis Element, maximum, unless otherwise Shown |
| Designation |
C |
Mn |
P |
S |
Cu |
Ni |
Cr |
Mo |
V |
Cb |
TiA |
NB |
| G230 |
0.20 |
1.35 |
0.04 |
0.04 |
0.25 |
0.20 |
0.15 |
0.06 |
0.008 |
0.008 |
0.025 |
^ |
| G255 |
0.20 |
1.35 |
0.10 |
0.04 |
0.25 |
0.20 |
0.15 |
0.06 |
0.008 |
0.008 |
0.025 |
^ |
| G275 |
0.25 |
1.35 |
0.10 |
0.04 |
0.25 |
0.20 |
0.15 |
0.06 |
0.008 |
0.008 |
0.025 |
^ |
| G340 |
0.25 |
1.35 |
0.20 |
0.04 |
0.25 |
0.20 |
0.15 |
0.06 |
0.008 |
0.008 |
0.025 |
^ |
| G550 |
0.20 |
1.35 |
0.04 |
0.04 |
0.25 |
0.20 |
0.15 |
0.06 |
0.008 |
0.015 |
0.025 |
^ |
Audited Supplier 
){kind=link}